SUN WELDING SAFES Sun Welding Heirloom Series Home Safe H 36

Sun Welding Heirloom Series Home Safe H-36

Features

Sun Welding lines the six interior walls with 5/8″ fire board. See our fire ‘Fire Rating’ tab for more information. Then we hand build each interior from solid 3/4″ particle board. It is then finished a velour fabric (variety of colors to choose from). With one rifle configurations to choose or a solid collector shelf interior we have the interior for you. We can also custom build an interior made to your specifications. See ‘Interiors’ tab to view our interior options. There are six pre-drilled mounting holes in the bottom of every safe for bolting the safe down to the floor. > SEE ‘INTERIORS’ TAB

Sun Welding’s independent mounted bolting system stops a wide variety of attacks. Using a cam drive system to gear the linkage these parts will not break under pressure. The Heirloom Series offers six 1″ diameter locking bolts (3 active each side, 3 dead hinge side). With two re-lockers, protected by Armor Hard Plate and second 1/2″ steel plate the security is reinforced.

Sun Welding gives the user the option of a UL listed group 2 combination mechanical lock or electronic lock. We offer a wide variety of manufactures from BigRed, S&G, LaGard, and SecuRam. In addition to EMP proof redundant style locks. > SEE ‘OPTIONS’ TAB

Every Sun Welding Safe exceeds the UL RSC and CA DOJ requirements. We tested out entry level safes to ensure the test requirements.

FIRE RATING

The fire insulation is used on all six sides of the safe. In addition heat sensitive expanding fire seal that swells up to eight times its size is used to fill in the space around the door. The fire rating test is completed by taking a safe and placing it in an oven that is 1200_for ‘x’ minutes. At ‘x’ minutes the internal temperature of the safe reaches 350_. The actual burn time of the safe has many factors such as temperature of the fire and length of the fire.

• 30 Minutes Standard weighs 225 lbs
• 1/4″ Door w/ 10 Gauge Body 258 lbs
• 3/8″ Door w/ 3/16″ Body 307 lbs
• 1/2″ Door w/ 1/4″ Body 364 lbs
• Internal dimensions approximately 22.5″H x 19″W x 13.75″D
• 60 Minutes increases weight to 240 lbs
• 1/4″ Door w/ 10 Gauge Body 283 lbs
• 3/8″ Door w/ 3/16″ Body 332 lbs
• 1/2″ Door w/ 1/4″ Body 389 lbs
• Internal dimensions approximately 21.25″H x 17.75″W x 12.5″D
• 90 Minutes increases weight to 255 lbs
• 1/4″ Door w/ 10 Gauge Body 298 lbs
• 3/8″ Door w/ 3/16″ Body 347 lbs
• 1/2″ Door w/ 1/4″ Body 404 lbs
• Internal dimensions approximately 20″H x 16.5″W x 11.25″D

Options

---

Extended Lock Warranty available in 10 year or lifetime for; BigRed Mechanical Lock, S&G Mechanical Lock, LaGard Electronic Lock, LaGard EMP Electronic/Mechanical Lock, SecuRam Electronic Lock, or SecuRam EMP Electronic/Mechanical Lock.

---

12″DriRod – eliminates moisture from staying in the safe. Keeps guns from rusting.

---

300 Gram Pingi – absorbs moisture from staying in the safe. Keeps guns from rusting.

---

4 Gun Pistol Rack

---

5 Gun Pistol Rack

---

Extra Small Shelf – Need more storage? Add an extra side shelf.

---

Extra Top Shelf – Need more storage? Add an extra top shelf.

---

Change Tool – Allows you to change the mechanical combination to your safe. A locksmith is always the best and most reliable method of changing the combination.

---

Double Box for Shipping – Adds protection during shipping.

---

LED Light Kit – Offers lighting inside the safe. Available with a external plug (AC) or battery box (DC). Select the install option and have the lights installed before shipping.

---

Anchor Kit – Bolts required for mounting your safe to the floor.

NOTE: 3 or 5 spoke handle may touch the body of the safe when opened.

Interiors

Finishes